This type of rotary joint is applied in situations with high rotational speed and high pressure.

The balanced sealing form with tiny-sized contacts is adopted. All the tube sleeves in contact with the fluid are made of stainless steel, allowing the use of different fluids for operation.

A special double-row angular contact ball bearing is adopted, which can withstand extremely large axial loads.

The spring located outside the fluid passage is used to prevent fluid leakage, and the pressure value required by the spring to act on the sealing surface has been precisely calculated.

This design can also prevent noise and vibration caused by fluid disturbances at the same time.

During the water supply process, the maximum pressure is 400 kilograms and the maximum rotational speed is 1500 revolutions per minute.

When using hydraulic oil, the maximum pressure is 400 kilograms and the maximum rotational speed is 1500 revolutions per minute.